When it comes to buying a new furnace, you want to make sure that the repair is done properly. At some point in the life of your existing system, it’s likely that there will be a breakdown. However, it doesn’t have to be a costly and inconvenient experience. By training yourself on how to spot a repair scams and avoid them, you can ensure that the work is done in a safe and proper manner. Here are some ways to tell if Furnace Repair in Brockton MA contractor did their repairs correctly:
Get to Know Your Furnace
Although it can be tempting to rely on the recommendations of your contractor when it comes to the repair of your existing furnace, you’d be surprised how often those recommendations don’t line up with what you actually need. There are many signs that your contractor isn’t putting your needs first.
One of the first steps toward determining if your contractor did the repairs correctly is to test it. Ideally, you will have the opportunity to perform this test before your contractor starts work. However, if this is not the case, you can call your contractor and ask them to test it for you. The best test is to run your old unit and your new one together. You will want to ensure that there are no signs of damage from the old unit. If there is, your contractor may not have installed the correct equipment and could be causing damage by operating two units against each other.
Inspecting your new furnace before it’s installed can help you identify potential problems early on. However, it’s important to remember that your contractor is not an architectural engineer and may not be familiar with all of the pitfalls that inspectors are likely to discover. There are a few signs that your contractor may have overlooked. For example, your contractor may not have tested the motor for any signs of damage. Or, they may be too busy installing the new system to examine the old equipment. Your contractor may also overlook a problem until it’s too late.
Test Your Equipment
One of the most important things you can do to help ensure that your new furnace is up to snuff is to check it out. You may not be aware of all of the equipment issues that your contractor may be overlooking. There may be a problem with the motor or the blower door. Your contractor may not have observed that the motor is running. Your central air conditioner may be running constantly, causing damage to your ductwork and blower doors. Your central heating system may be running too, causing damage to your ductwork and spark plugs.
Check the Contractor’s References
One important thing to keep in mind when shopping around for a contractor is to check out their references. One problem that many contractors have is that they only refer to themselves as “furnace contractors” and don’t reference other contractors that they have worked with. This is a red flag and should raise your alarms. Ask your contractor who they refer to themselves as and check to see if they are in fact a “furnace contractor.”
While it’s important to shop around for a new furnace and contractor, it’s also important to get to know those involved. By doing so, you will be able to identify potential problems early on and have a better chance of avoiding them. It’s also important to remember that there are many different types of contractors and that each has different levels of experience and quality control. As such, it’s difficult to know for certain if a repair is legitimate or not. The post How to Know If Your Furnace Repair Brockton MA is Done Properly or Not.